Up Products Race Engineering Technical Cool Stuff About
| |
Race Engineering, Trackside Car Setup

 |
 | Vehicle Dynamics consulting |
 | Springs, anti-roll bars and damper tuning and
recommendations |
 | Jounce bumpers, dual-rate springs, 3rd spring and
damper tuning |
 | Camber, caster, toe settings and dynamic
optimization |
 | Tire pressure selection |
 | Aero and ride height optimization |
 | Setting up for balance, maximum downforce,
fastest lap times, overtaking |
 | Application of "magic numbers" for quick
and efficient setup changes |
 | Gear ratios, final drive ratio, shift point
optimization |
 | Car setup to match particular tracks and important
corners |
 | Fuel and tire strategy development |
 | Engine health monitoring via telemetry |
 | Mechanical and electrical system setup and
troubleshooting |
|
Data Acquisition
 | Selection of data acquisition system and sensors |
 | Installation if data acquisition and sensors |
 | Setup and programming (MoTeC, others) |
 | Interpretation of numeric data for drivers and crew |
 | Evaluation of the car handling properties and
potential |
 | Tire utilization evaluation |
 | Understeer/oversteer quantification and management |
 | Downforce measurement |
 | Ride height, roll and pitch measurement |
 | Real-world damper force measurement |
 | Identification of driving style |
 | Setting up the car for the driver
|
|

 |
Data-Based Driver Coaching

|
 | Application of objective track data to improve
car/driver performance |
 | Helping the driver to use the car's full potential |
 | Driving line optimization |
 | Driving style optimization for best lap times or
longest tire life |
 | Straight-line braking and trail braking techniques |
|
Design, Engineering, Manufacturing
 | Design or chassis, suspension, brakes, aero devices |
 | Mechanical component design and development using
CAD and FEA |
 | 3D modeling of car and suspension |
 | Suspension design for a specific tire |
 | Machining, fabrication, welding, composite material
technologies |
 | Ultimate strength, stiffness, reliability and race
track verification |
|
 |
Testing, Tuning, Development
 |
 | Computer racecar simulation, lap simulation |
 | Real-world tire data gathering and tire model
generation |
 | Planning for efficient use of track testing time |
 | Selection of tires based on visual, pyrometer and
track data |
 | Brake system optimization |
 | Full car modeling and simulation to identify
opportunities for improvement
|
|
All road racing series are supported. Most of these
services can be offered at the race track or remotely. References are provided
upon request. Please call (248)342-3231 or email
to inquire about these services.

|