$995.00

Supercar Engineering W-I-D-E Front Brake Rotor Upgrade, 3000GT/S
[SCE-WIDERoto]

Supercar Engineering W-I-D-E Front Brake Rotor Upgrade, 3000GT/S

Brake rotors that work. New and improved! Now better than ever! Wider and heavier. Supercar Engineering 2nd gen VR4/TT front WIDE 2-piece floating mounted rotor upgrade:

Reuse your factory Mitsubishi 4-piston front brake calipers and install better rotors! Widen the calipers with provided spacers and harware and install WIDE (35 mm), directionally vaned, cooler-running rotors.

Will 5 mm wider make a difference? A HUGE difference! These rotor have more mass where you need it most. They absorb all the heat denerated from braking and dissipate it though superior cooling. Good enough for autobahn braking or road racing.

  • Track proven two-piece floating heavy-duty rotors for best braking performance.
  • CNC machined 7075-T6 billet aluminum hard anodized rotor hats.
  • A ligher design - 4.0 lbs reduction is the unsprung and rotational mass!
  • Curved directional vanes for better cooling.
    Vented from the correct side - the inboard side of the wheel.
  • Width is 35 mm for extra body mass and better cooling vs the stock 30 mm rotors with non-curved small vents.
  • StopTech floating maintenance-free drive system with a unique InconelĀ® spring washer anti-rattle system allows for rotor expansion due to heat and virtually eliminates rotor warping.
  • External diameter is exact OEM 314 mm.
  • The original OEM brake balance is maintained.
  • Slotted is standard. Plain is available. Drilled is a $100 option.
  • All the needed hardware is in the kit (not shown here). Installs comfortably in 1-2 hours. Installation instructions are included.

  • Reviews

    Manufacturers
    Quick Find
     
    Use keywords to find the product you are looking for.
    Advanced Search
    1 x AEM 5 Gallon Tank Kit for Water Injection Kit
    1 x AEM No-Weld O2 Sensor Mount 3 Inch
    1 x AEM Boost Gauge -1 to 2.4BAR w/Analog Face
    1 x AEM 5 BAR / 75 PSIa MAP Stainless Steel Sensor Kit
    1 x AEM Plug-N-Pin Kit for EMS
    1 x AEM EMS Sensors and Replacement Parts
    1 x AEM Oil Temp Gauge 100-300F
    1 x AEM Peak & Hold Injector Driver
    1 x AEM Stainless Manifold Bung Install Kit
    1 x AEM No-Weld O2 Sensor Mount - 2.5 Inch
    1 x AEM Boost Gauge -30 to 35PSI w/Analog Face
    1 x AEM Boost Gauge 0 to 60PSI w/Analog Face
    1 x AEM 8 Channel Twin Fire Ignition Module
    1 x AEM 500 PSIg Stainless Steel Sensor Kit
    1 x AEM 35-2610 Plug-N-Pin Kit
    1 x AEM Oil Pressure Gauge 0 to 100 psi
    1 x AEM 4-Channel K-Type Thermocouple Amplifier
    1 x AEM EMS Plug-N-Play Engine Management
    1 x AEM No-Weld O2 Sensor Mount - 2 Inch
    1 x AEM EGT Gauge 0-980C with Analog Face
    1 x AEM Recirculation-Style Water/Methanol Injection Pump
    1 x AEM 1 BAR / 15 PSIa MAP Stainless Steel Sensor Kit
    1 x AEM AQ-1 Data Logger
    1 x AEM Replacement Relocation Harness
    1 x AEM Boost Pressure Gauge 0-15PSI with Analog Face
    1 x AEM 3.5 Bar Or 50Psia Brass Sensor Kit
    1 x AEM AQ-1 96" Flying Lead Wiring Harness
    1 x AEM Fuel Ignition Controller
    1 x AEM EGT Gauge 0-1800F with Analog Face
    1 x AEM 100 PSIg Stainless Steel Sensor Kit
    1 x AEM Boost Control Solenoid Kit
    1 x AEM Engine Position Module for Chevy Small & Big Block Engines
    1 x AEM High Output Inductive "Dumb" Coil
    1 x AEM 150 Psig Brass Sensor Kit & Flying Lead
    1 x AEM AQ-1 18" Flying Lead Wiring Harness
    1 x AEM Adjustable Fuel Pressure Regulator
    1 x AEM Exhaust Back Pressure Sensor Install Kit
    1 x AEM 1 Gallon Water/Methanol Injection Kit
    1 x AEM MAP
    1 x AEM EGT Sensor Installation Kit
    1 x AEM No-Weld O2 Sensor Mount 3.5 Inch
    1 x AEM 2000 PSIG Sensor Kit Universal
    1 x AEM Oil Pressure Gauge 0-100PSI w/Analog Face
    1 x AEM Transmission Temperature Gauge 40-148C w/Analog Face
    1 x AEM 100 PSIg Brass Sensor Kit
    1 x AEM AQ-1 Mini Harness
    1 x AEM Boost Gauge 35-50 psi
    1 x Competition Clutch Stage 5 - Strip Series 1420 Clutch Kit
    1 x StopTech BBK - 3000GT/Stealth Turbo '91-99 - ST-40 380x32mm kit
    1 x Supercar Engineering "Big Reds" Rotor-only Upgrade Kit - 13"x32m
    1 x *KAAZ AWD-Rear Limited Slip Differential
    1 x Competition Clutch Ultra Lightweight Steel Flywheel
    1 x Competition Clutch Lightweight Flywheel
    1 x NGK G-Power Platinum Spark Plug
    1 x Competition Clutch Stage 3.5 - Street/Strip Series Clutch Kit
    1 x Competition Clutch Kit Stage 2 - Street Series 2100
    1 x TEIN HTECH Lowering Springs
    1 x EXEDY OEM Replacement Clutch Kit
    1 x NGK Laser Iridium Spark Plug
    1 x SPC Alignment Components - EZ Cam XR
    1 x ST Springs - SportTech
    1 x Tein S-Tech Lowering Springs
    1 x Supercar Engineering W-I-D-E Front Brake Rotor Upgrade, 3000GT/S
    1 x Competition Clutch Kit Stage 4 - Strip Series 0620
    1 x Competition Clutch Stage 4 - Strip Series 1620 Clutch Kit
    $20,104.26
    Manufacturer Info
    Supercar Engineering
    Other products
    Share Product
    Share via E-Mail
    Share on Facebook Share on Twitter
    We Accept