$5,995.00

*SCE DogBox Transmission
[dogbox6]

*SCE DogBox Transmission
Now in stock!

This is a dogbox gearset for the 6-speed 3000GT AWD transmission. A dogbox is a transmission that has a racing gear engagement style that used dog teeth instead of the conventional synchronizers, which allows quick and definite gear shifts.

The gears that are equipped with the dog teeth are 1, 2, 3, and 4 only. The 5, 6 and Reverse use the stock synchronizers.

- Dog teeth on 1, 2, 3 and 4th gears (no synchros on 1-4 gears)
- Brand new transmission input shaft that is stronger than stock
- Close-ratio transmission
- A longer 1st gear (14/41 teeth or 12% longer than stock)
- A longer 2nd gear (23/41 teeth or 7% longer than stock)
- Straight-cut 1st gear of a larger diameter to reduce the loads on the bell housing
- Reduced helix 2nd gear for less noise is at least as strong
- Superfinished gears

A complete kit includes:
- Input shaft
- 1st gear
- 2nd gear
- 3rd gear
- 4th gear
- 1/2 slider and hub
- 3/4 slider and hub
- 1/2 billet shift fork
- 3/4 billet shift fork

The 1st gear has straight cut teeth. The second is has a reduced helical teeth. The third and fourth gears are stock. Unlike most racing dogbox transmissions, this transmission is absolutely silent in all gears except the 1st. In first gear does not whine, but it sounds pleasantly entertaining. The gear box uses the original H-pattern shifting mechanism. This transmission is absolutely streetable.

Image #2
Image #3
Image #4
Image #5
Image #6
Image #7
Image #8
Image #9

Stock third and fourth gears are required as cores.
Reviews
Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x AEM 5 Gallon Tank Kit for Water Injection Kit
1 x AEM No-Weld O2 Sensor Mount 3 Inch
1 x AEM Boost Gauge -1 to 2.4BAR w/Analog Face
1 x AEM 5 BAR / 75 PSIa MAP Stainless Steel Sensor Kit
1 x AEM Plug-N-Pin Kit for EMS
1 x AEM EMS Sensors and Replacement Parts
1 x AEM Oil Temp Gauge 100-300F
1 x AEM Peak & Hold Injector Driver
1 x AEM Stainless Manifold Bung Install Kit
1 x AEM No-Weld O2 Sensor Mount - 2.5 Inch
1 x AEM Boost Gauge -30 to 35PSI w/Analog Face
1 x AEM Boost Gauge 0 to 60PSI w/Analog Face
1 x AEM 8 Channel Twin Fire Ignition Module
1 x AEM 500 PSIg Stainless Steel Sensor Kit
1 x AEM 35-2610 Plug-N-Pin Kit
1 x AEM Oil Pressure Gauge 0 to 100 psi
1 x AEM 4-Channel K-Type Thermocouple Amplifier
1 x AEM EMS Plug-N-Play Engine Management
1 x AEM No-Weld O2 Sensor Mount - 2 Inch
1 x AEM EGT Gauge 0-980C with Analog Face
1 x AEM Recirculation-Style Water/Methanol Injection Pump
1 x AEM 1 BAR / 15 PSIa MAP Stainless Steel Sensor Kit
1 x AEM AQ-1 Data Logger
1 x AEM Replacement Relocation Harness
1 x AEM Boost Pressure Gauge 0-15PSI with Analog Face
1 x AEM 3.5 Bar Or 50Psia Brass Sensor Kit
1 x AEM AQ-1 96" Flying Lead Wiring Harness
1 x AEM Fuel Ignition Controller
1 x AEM EGT Gauge 0-1800F with Analog Face
1 x AEM 100 PSIg Stainless Steel Sensor Kit
1 x AEM Boost Control Solenoid Kit
1 x AEM Engine Position Module for Chevy Small & Big Block Engines
1 x AEM High Output Inductive "Dumb" Coil
1 x AEM 150 Psig Brass Sensor Kit & Flying Lead
1 x AEM AQ-1 18" Flying Lead Wiring Harness
1 x AEM Adjustable Fuel Pressure Regulator
1 x AEM Exhaust Back Pressure Sensor Install Kit
1 x AEM 1 Gallon Water/Methanol Injection Kit
1 x AEM MAP
1 x AEM EGT Sensor Installation Kit
1 x AEM No-Weld O2 Sensor Mount 3.5 Inch
1 x AEM 2000 PSIG Sensor Kit Universal
1 x AEM Oil Pressure Gauge 0-100PSI w/Analog Face
1 x AEM Transmission Temperature Gauge 40-148C w/Analog Face
1 x AEM 100 PSIg Brass Sensor Kit
1 x AEM AQ-1 Mini Harness
1 x AEM Boost Gauge 35-50 psi
$9,167.93
Manufacturer Info
Supercar Engineering
Other products
Share Product
Share via E-Mail
Share on Facebook Share on Twitter
We Accept