$2,595.00

StopTech Rear BBK - 3/S Turbo '91-99 - ST-22 328x28mm kit
[ST-22Rear328]

StopTech Rear BBK - 3/S Turbo \'91-99 - ST-22 328x28mm kit

This is a rear brake upgrade with StopTech calipers and rotors for Dodge Stealth and Mitsubishi 3000GT Turbo models.

The unique features of StopTech kits are:

  • NEW! StopTech ST-22 calipers, made specifically to match rear systems best. Machined from billet aluminum.
  • StopTech 328x28mm AeroRotors.
  • Tested and designed specifically for the 3/S cars with caliper pistons sized to optimize the brake balance and ABS performance.
  • May be added to cars with existing front StopTech or any other kits. Custom piston sizes available at no extra charge.
  • Superior and unmatched quality!
  • StopTech Patent Pending AeroRotors® are manufactured at QS-9000 registered facilities. They flow more air than any rotor available, meaning less brake fade and longer rotor and pad life.
  • StopTech 7075-T6 billet aluminum AeroHats® are directionally vented for improved cooling.
  • Floating drive system with a unique Inconel® spring washer anti-rattle system allows for rotor expansion due to heat and virtually eliminates rotor warping.
  • Stainless steel braided brake lines for improved brake control.
  • Rubber dust boots to keep dust and water away from pistons and piston seals.
  • Uses standard FMSI 961 pads.
  • Red, Black and Silver calipers are standard, yellow and blue colors are available.

    Additional links related to these kits:
    3Si.org Main thread
    3Si.org NA kit specific thread
    StopTech website
    StopTech Balanced Brake Upgrades
    Why StopTech?StopTech caliper deflection chart
    StopTech directionally vented floating AeroRotors
    StopTech technical "white papers"
    StopTech FAQ
    StopTech wheel fitment charts
    Race Cars running StopTech
    Picture gallery

    Please specify rotor type when ordering. Slotted rotors are standard. Drilled - $100 extra per axle set. Plain rotors are available as a free option.



    This product is sold exclusively by your StopTech dealer Supercar Engineering.

    Available Options:

    Caliper color:

    Rotor type:

    Zinc coated rotors:

  • Reviews
    Manufacturers
    Quick Find
     
    Use keywords to find the product you are looking for.
    Advanced Search
    1 x AEM 5 Gallon Tank Kit for Water Injection Kit
    1 x AEM No-Weld O2 Sensor Mount 3 Inch
    1 x AEM Boost Gauge -1 to 2.4BAR w/Analog Face
    1 x AEM 5 BAR / 75 PSIa MAP Stainless Steel Sensor Kit
    1 x AEM Plug-N-Pin Kit for EMS
    1 x AEM EMS Sensors and Replacement Parts
    1 x AEM Oil Temp Gauge 100-300F
    1 x AEM Peak & Hold Injector Driver
    1 x AEM Stainless Manifold Bung Install Kit
    1 x AEM No-Weld O2 Sensor Mount - 2.5 Inch
    1 x AEM Boost Gauge -30 to 35PSI w/Analog Face
    1 x AEM Boost Gauge 0 to 60PSI w/Analog Face
    1 x AEM 8 Channel Twin Fire Ignition Module
    1 x AEM 500 PSIg Stainless Steel Sensor Kit
    1 x AEM 35-2610 Plug-N-Pin Kit
    1 x AEM Oil Pressure Gauge 0 to 100 psi
    1 x AEM 4-Channel K-Type Thermocouple Amplifier
    1 x AEM EMS Plug-N-Play Engine Management
    1 x AEM No-Weld O2 Sensor Mount - 2 Inch
    1 x AEM EGT Gauge 0-980C with Analog Face
    1 x AEM Recirculation-Style Water/Methanol Injection Pump
    1 x AEM 1 BAR / 15 PSIa MAP Stainless Steel Sensor Kit
    1 x AEM AQ-1 Data Logger
    1 x AEM Replacement Relocation Harness
    1 x AEM Boost Pressure Gauge 0-15PSI with Analog Face
    1 x AEM 3.5 Bar Or 50Psia Brass Sensor Kit
    1 x AEM AQ-1 96" Flying Lead Wiring Harness
    1 x AEM Fuel Ignition Controller
    1 x AEM EGT Gauge 0-1800F with Analog Face
    1 x AEM 100 PSIg Stainless Steel Sensor Kit
    1 x AEM Boost Control Solenoid Kit
    1 x AEM Engine Position Module for Chevy Small & Big Block Engines
    1 x AEM High Output Inductive "Dumb" Coil
    1 x AEM 150 Psig Brass Sensor Kit & Flying Lead
    1 x AEM AQ-1 18" Flying Lead Wiring Harness
    1 x AEM Adjustable Fuel Pressure Regulator
    1 x AEM Exhaust Back Pressure Sensor Install Kit
    1 x AEM 1 Gallon Water/Methanol Injection Kit
    1 x AEM MAP
    1 x AEM EGT Sensor Installation Kit
    1 x AEM No-Weld O2 Sensor Mount 3.5 Inch
    1 x AEM 2000 PSIG Sensor Kit Universal
    1 x AEM Oil Pressure Gauge 0-100PSI w/Analog Face
    1 x AEM Transmission Temperature Gauge 40-148C w/Analog Face
    1 x AEM 100 PSIg Brass Sensor Kit
    1 x AEM AQ-1 Mini Harness
    1 x AEM Boost Gauge 35-50 psi
    1 x Competition Clutch Stage 5 - Strip Series 1420 Clutch Kit
    1 x StopTech BBK - 3000GT/Stealth Turbo '91-99 - ST-40 380x32mm kit
    1 x Supercar Engineering "Big Reds" Rotor-only Upgrade Kit - 13"x32m
    1 x *KAAZ AWD-Rear Limited Slip Differential
    1 x Competition Clutch Ultra Lightweight Steel Flywheel
    1 x Competition Clutch Lightweight Flywheel
    1 x NGK G-Power Platinum Spark Plug
    1 x Competition Clutch Stage 3.5 - Street/Strip Series Clutch Kit
    1 x Competition Clutch Kit Stage 2 - Street Series 2100
    1 x TEIN HTECH Lowering Springs
    1 x EXEDY OEM Replacement Clutch Kit
    1 x NGK Laser Iridium Spark Plug
    1 x SPC Alignment Components - EZ Cam XR
    1 x ST Springs - SportTech
    $18,080.92
    Manufacturer Info
    Supercar Engineering
    Other products
    Share Product
    Share via E-Mail
    Share on Facebook Share on Twitter
    We Accept