$38.34

SPC Alignment Components - EZ Cam XR
[81250]

SPC Alignment Components - EZ Cam XR

After the installation of either lowering springs of a coil-over kit, the alignment of a vehicle should always be checked. Once a vehicle is lowered, wheel camber may become excessively negative, meaning the top of the tire is angled inward (toward the center of the vehicle). While some negative camber aids in improving traction and road adhesion, too much can result in compromised handling and accelerated tire wear. This is an affordable solution to correct excessive negative camber. These alignment kits assist in adjusting the camber of a vehicle back to factory specifications. They also allow an experienced chassis tuner to utilize the increased adjustment range to dial-in a performance-oriented alignment that uses negative camber to maximize the true potential of a chassis. With correct alignment, turn-in becomes more precise and handling becomes gratifyingly crisp and predictable. High-speed stability is also enhanced, making this kit a necessity for the serious performance tuner.

Features:

  • Precision alignment kits for maximum performance
  • Prevents uneven tire wear
  • Corrects excessive negative camber
  • Wider range of camber adjustment - suitable for street or track tuning
  • Two year warranty
Reviews

Customers who bought this product also purchased
BLE Solid Race Tensioner
BLE Solid Race Tensioner
* SCE 3/S-EVO8 Suspension Adapters
* SCE 3/S-EVO8 Suspension Adapters
SpeedBleeders
SpeedBleeders
Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x AEM 5 Gallon Tank Kit for Water Injection Kit
1 x AEM No-Weld O2 Sensor Mount 3 Inch
1 x AEM Boost Gauge -1 to 2.4BAR w/Analog Face
1 x AEM 5 BAR / 75 PSIa MAP Stainless Steel Sensor Kit
1 x AEM Plug-N-Pin Kit for EMS
1 x AEM EMS Sensors and Replacement Parts
1 x AEM Oil Temp Gauge 100-300F
1 x AEM Peak & Hold Injector Driver
1 x AEM Stainless Manifold Bung Install Kit
1 x AEM No-Weld O2 Sensor Mount - 2.5 Inch
1 x AEM Boost Gauge -30 to 35PSI w/Analog Face
1 x AEM Boost Gauge 0 to 60PSI w/Analog Face
1 x AEM 8 Channel Twin Fire Ignition Module
1 x AEM 500 PSIg Stainless Steel Sensor Kit
1 x AEM 35-2610 Plug-N-Pin Kit
1 x AEM Oil Pressure Gauge 0 to 100 psi
1 x AEM 4-Channel K-Type Thermocouple Amplifier
1 x AEM EMS Plug-N-Play Engine Management
1 x AEM No-Weld O2 Sensor Mount - 2 Inch
1 x AEM EGT Gauge 0-980C with Analog Face
1 x AEM Recirculation-Style Water/Methanol Injection Pump
1 x AEM 1 BAR / 15 PSIa MAP Stainless Steel Sensor Kit
1 x AEM AQ-1 Data Logger
1 x AEM Replacement Relocation Harness
1 x AEM Boost Pressure Gauge 0-15PSI with Analog Face
1 x AEM 3.5 Bar Or 50Psia Brass Sensor Kit
1 x AEM AQ-1 96" Flying Lead Wiring Harness
1 x AEM Fuel Ignition Controller
1 x AEM EGT Gauge 0-1800F with Analog Face
1 x AEM 100 PSIg Stainless Steel Sensor Kit
1 x AEM Boost Control Solenoid Kit
1 x AEM Engine Position Module for Chevy Small & Big Block Engines
1 x AEM High Output Inductive "Dumb" Coil
1 x AEM 150 Psig Brass Sensor Kit & Flying Lead
1 x AEM AQ-1 18" Flying Lead Wiring Harness
1 x AEM Adjustable Fuel Pressure Regulator
1 x AEM Exhaust Back Pressure Sensor Install Kit
1 x AEM 1 Gallon Water/Methanol Injection Kit
1 x AEM MAP
1 x AEM EGT Sensor Installation Kit
1 x AEM No-Weld O2 Sensor Mount 3.5 Inch
1 x AEM 2000 PSIG Sensor Kit Universal
1 x AEM Oil Pressure Gauge 0-100PSI w/Analog Face
1 x AEM Transmission Temperature Gauge 40-148C w/Analog Face
1 x AEM 100 PSIg Brass Sensor Kit
1 x AEM AQ-1 Mini Harness
1 x AEM Boost Gauge 35-50 psi
1 x Competition Clutch Stage 5 - Strip Series 1420 Clutch Kit
1 x StopTech BBK - 3000GT/Stealth Turbo '91-99 - ST-40 380x32mm kit
1 x Supercar Engineering "Big Reds" Rotor-only Upgrade Kit - 13"x32m
1 x *KAAZ AWD-Rear Limited Slip Differential
1 x Competition Clutch Ultra Lightweight Steel Flywheel
1 x Competition Clutch Lightweight Flywheel
$16,321.99
Manufacturer Info
SPC
Other products
Share Product
Share via E-Mail
Share on Facebook Share on Twitter
We Accept