$325.00

Getrag Transfer Case Sleeve hardened FLEXOR Steel
[Sleeve-Flexr]

Getrag Transfer Case Sleeve hardened FLEXOR Steel
This is an upgraded Hardened FLEXOR® replacement input sleeve for the 5-speed 25-spline Getrag transfer case. If your input sleeve has worn splines, it must be replaced to prevent stripping the splines and the consequential costly failure of the central differential viscous coupling unit.

FLEXOR® steel has been effective in providing equal if not superior wear, toughness, fatigue strength and tensile strength characteristics over most common alloy steels.

http://www.pennsylvaniasteel.com/flexor.php

Installation requires a hydraulic press.

Only available for 5-speed 25-spline transfer cases.

NOTE (for '91-92, 18-spline only): If the transfer case has a bolt in the middle of the cover near the "e" in "Getrag", then it can be converted to 25-spline by installing a 5-speed 25-spline sleeve.
Reviews

Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
0 items
Manufacturer Info
Supercar Engineering
Other products
Share Product
Share via E-Mail Share on Facebook
Share on Twitter
We Accept