$7.00

SpeedBleeders
[SB]

SpeedBleeders

Introducing Speed Bleeder... The automotive bleeder screw with the built-in check valve that makes bleeding your brakes truly a one person job! Simply remove your OEM bleeder screw and replace it with Speed Bleeder. When you are ready to bleed your brakes loosen the Speed Bleeder 1/4 turn. Pump the brake lever or pedal until bubble free fluid is seen. Close the speed Bleeder and you are done. Anyone can do it!

MODELS AND APPLICATIONS:

  • All 2nd gen TT cars use four (4) SB1010 speedbleeders per car.

  • If your 1st gen TT car uses a 7 mm wrench for rear bleeder screws (reportedly 3/92-5/93), then you need two (2) SB1010 speedbleeders and two (2) SB7100 speedbleeders per car. Else, it they are all four (4) SB1010 speedbleeders.

  • If your NA car uses a 7 mm wrench for bleeder screws, then you need four SB7100 speedbleeders.

  • StopTech and most Brembo calipers use SB1010S short speedbleeders. They have a M10x1 thread and a 31.35 mm body. These calipers require two SpeedBleeders per each brake caliper.

  • Most AP Racing calipers use SB1010 speedbleeders. They have a M10x1 thread and a 34.44 mm body. These calipers require two SpeedBleeders per each brake caliper.

    Available Options:

    Model:

    Quantity:

  • Reviews

    Manufacturers
    Quick Find
     
    Use keywords to find the product you are looking for.
    Advanced Search
    0 items
    Manufacturer Info
    Other products
    Share Product
    Share via E-Mail Share on Facebook
    Share on Twitter
    We Accept