Introducing Speed Bleeder… The automotive bleeder screw with the built-in check valve that makes bleeding your brakes truly a one person job! Simply remove your OEM bleeder screw and replace it with Speed Bleeder. When you are ready to bleed your brakes loosen the Speed Bleeder 1/4 turn. Pump the brake lever or pedal until bubble free fluid is seen. Close the speed Bleeder and you are done. Anyone can do it!
MODELS AND APPLICATIONS:
All 2nd gen TT cars use four (4) SB1010 speedbleeders per car.
If your 1st gen TT car uses a 7 mm wrench for rear bleeder screws (reportedly 3/92-5/93), then you need two (2) SB1010 speedbleeders and two (2) SB7100 speedbleeders per car. Else, it they are all four (4) SB1010 speedbleeders.
If your NA car uses a 7 mm wrench for bleeder screws, then you need four SB7100 speedbleeders.
StopTech and most Brembo calipers use SB1010S short speedbleeders. They have a M10x1 thread and a 31.35 mm body. These calipers require two SpeedBleeders per each brake caliper.
Most AP Racing calipers use SB1010 speedbleeders. They have a M10x1 thread and a 34.44 mm body. These calipers require two SpeedBleeders per each brake caliper.